| DRY BULK DENSITY | AGGREGATES SIZE | BONDING STRENGTH |
|---|---|---|
|
1.4 t/m³ |
4 mm |
≥ 1.5 N/mm² |
|
BINDER |
COVERAGE |
|
|
Ordinary Portland Cement |
Depending on joint thickness
and panel size |
|
|
WATER FOR MIXING |
COMPRESSIVE STRENGTH |
POT LIFE |
|
23% ± 2% (9.2 Litre/bag) |
≥ 20 N/mm² |
1 Hour |
|
PACKAGING |
STORAGE |
|
|
40kg |
6 Months |
|
SURFACE FOR USE
All surfaces must be clean and free of grease, fungus, loose particles, oil, paints, lime wash etc. Clean water must be used for mixing.
MIXING
Mix the product thoroughly with approximately 23% by weight of clean water using an electric mixer with attached stirrer for 3 – 5 minutes, until a homogeneous mix that is free from lump is achieved.
APPLICATION
Apply the panel adhesive evenly at the joints and gaps between the panel, with a minimum thickness of 10mm.
FIRE RESISTANCE
This product is non-combustible.
SAFETY PRECAUTIONS
This product contains cement additives and may cause irritation when in contact with skin or eyes. In case of any contact, wash thoroughly with clean water. If irritation persists, seek immediate medical attention.
DISCLAIMER
All information contained herein is only intended to give a fair description of the products and their capabilities under such specific test conditions.
However, it does not constitute an offer of warranty by the manufacturer nor a guarantee of its accuracy or completeness in describing the performance or suitability of the various products.
KG-MIX (M) SDN BHD is a manufacturer and distributor of cement based dry mix mortar such as Skim coat, Renders, Tile
Adhesive, Coloured Cement and Coloured Floor Hardener serving Malaysian and Oversea market.
© 2025 KG-Mix (M) Sdn. Bhd. (705033-K). All Rights Reserved.
