| DRY BULK DENSITY | JOINTING THICKNESS | ADHESION STRENGTH |
|---|---|---|
|
1.4 t/m³ |
3 mm |
≥ 1.0 N/mm² |
|
BINDER |
COVERAGE |
|
|
Ordinary Portland Cement |
Approx. 18 m² to 20 m² wall area for 40kg bag for 100mm block |
|
|
WATER FOR MIXING |
OPEN TIME |
POT LIFE |
|
30% ± 2% (12.0 Litre/bag) |
Approx. 20 Min at 25°C |
2 Hours |
|
PACKAGING |
STORAGE |
|
|
40kg |
6 Months |
|
SURFACE FOR USE
Block surfaces to be applied with adhesive must be sound, clean and free from any contamination that affect good bonding.
MIXING
Mix the adhesive thoroughly with approximately 30% by weight of clean water using an electric mixer with attached stirrer for 3 – 5 minutes, until a homogeneous mix that is free from lumps. is achieved. Allow the mixture to stand for 5 minutes, then mix again. The adhesive is now ready for use.
APPLICATION
Apply the adhesive using a notched trowel ensuring surface are fully covered with adhesive, knock the block lightly with a rubber mallet to ensure good bonding, remove excess adhesive before it sets.
FIRE RESISTANCE
This product is non-combustible.
SAFETY PRECAUTIONS
This product contains cement additives and may cause irritation when in contact with skin or eyes. In case of any contact, wash thoroughly with clean water. If irritation persists, seek immediate medical attention.
DISCLAIMER
All information contained herein is only intended to give a fair description of the products and their capabilities under such specific test conditions.
However, it does not constitute an offer of warranty by the manufacturer nor a guarantee of its accuracy or completeness in describing the performance or suitability of the various products.
KG-MIX (M) SDN BHD is a manufacturer and distributor of cement based dry mix mortar such as Skim coat, Renders, Tile
Adhesive, Coloured Cement and Coloured Floor Hardener serving Malaysian and Oversea market.
© 2025 KG-Mix (M) Sdn. Bhd. (705033-K). All Rights Reserved.
