| DRY BULK DENSITY | BEDDING THICKNESS | BONDING STRENGTH |
|---|---|---|
|
1.65 t/m³ |
3 – 12 mm |
≥ 1.0 N/mm² |
|
BINDER |
COVERAGE |
WATER FOR MIXING |
|
Ordinary Portland Cement |
1.5 kg/m² per mm thick |
23% ± 2% (9.2 Litre/bag) |
|
OPEN TIME |
SETTING TIME |
DETERMINATION OF SLIP |
|
Approx. 30 Mins at 25°C |
Initial Dry 8 Hours |
< 0.5 mm |
|
POT LIFE |
PACKAGING |
STORAGE |
|
2 Hours |
40kg |
6 Months |
SURFACE FOR USE
Surfaces to be tiled must be sound, clean and free from any contamination. Wet the surface prior to application in hot and dry conditions.
MIXING
Mix the product with approximately 23% by weight of clean water. Thoroughly mix preferably using an electric mixer with stirrer attachment until a homogeneous mix is obtained.
APPLICATION
Apply adhesive onto substrate using notch trowel and press tiles firmly, knock tiles into position. Pre-soaking of tiles is not required.
FIRE RESISTANCE
This product is non-combustible.
SAFETY PRECAUTIONS
This product contains cement additives and may cause irritation when in contact with skin or eyes. In case of any contact, wash thoroughly with clean water. If irritation persists, seek immediate medical attention.
DISCLAIMER
All information contained herein is only intended to give a fair description of the products and their capabilities under such specific test conditions.
However, it does not constitute an offer of warranty by the manufacturer nor a guarantee of its accuracy or completeness in describing the performance or suitability of the various products.
KG-MIX (M) SDN BHD is a manufacturer and distributor of cement based dry mix mortar such as Skim coat, Renders, Tile
Adhesive, Coloured Cement and Coloured Floor Hardener serving Malaysian and Oversea market.
© 2025 KG-Mix (M) Sdn. Bhd. (705033-K). All Rights Reserved.
